View NJM78L00_993190.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NJM78L00
3-TERMINAL POSITIVE VOLTAGE REGULATOR
GENERAL DESCRIPTION The NJM78L00 series of 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These regulators employ internal current-limiting and thermal-shutdown, making them essentially indestructible. If adequate heat sinking is provided, they can deliver up to 100mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The NJM78L00 series used as a Zener diode/resistor combination replacement, offers an effective output impedance improvement of typically two orders of magnitude, along with lower quiescent current and lower noise. PACKAGE OUTLINE (TO-92) (SOT-89)
NJM78L00A 1.OUT 2.GND 3.IN
NJM78L00UA 1.OUT 2.GND 3.IN
FEATURES Internal Short Circuit Current Limit Internal Thermal Overload Protection Excellent Ripple Rejection Guarantee'd 100mA Output Current Package Outline Bipolar Technology
TO-92, SOT-89
EQUIVALENT CIRCUIT
Ver.2003-07-18
-1-
NJM78L00
ABSOLUTE MAXIMUM RATINGS
PARAMETER Input Voltage SYMBOL VIN MAXIMUM RATINGS (78L02A to 78L09A) (78L12A to 78L15A) (78L18A to 78L24A) (TO-92) 500 (EMP8) 350 (SOT-89) 300 -40 to +85 -40 to +150 30 35 40
(Ta=25C)
UNIT V
Power Dissipation Operating Temperature Range Storage Temperature Range
PD Topr Tstg
mW C C
ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing.
PARAMETER NJM78L02A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L03A(*1) Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L05A(*3) Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage (*1) : SOT-89 package only. (*2) : TO-92 package only. (*3) : SOT-89, TO-92, EMP8 SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=9V, IO=40mA VIN=4.75V to 20V, IO=40mA VIN=5V to 20V, IO=40mA VIN=9V, IO=1 to 40mA VIN=9V, IO=1 to 100mA VIN=9V, IO=0mA VIN=9V, IO=1mA 6V< VIN <16V, IO=40mA, ein=1VP-P, f=120Hz VIN=9V, BW=10Hz to 100kHz, IO=40mA VIN=9V, IO=40mA VIN=5V to 20V, IO=40mA VIN=6V to 20V, IO=40mA VIN=9V, IO=1 to 40mA VIN=9V, IO=1 to 100mA VIN=9V, IO=0mA VIN=9V, IO=1mA 6V< VIN <16V, IO=40mA, ein=1VP-P, f=120Hz VIN=9V, BW=10Hz to 100kHz, IO=40mA VIN=10V, IO=40mA VIN=7V to 20V, IO=40mA VIN=8V to 20V, IO=40mA VIN=10V, IO=1 to 40mA VIN=10V, IO=1 to 100mA VIN=10V, IO=0mA VIN=10V, IO=1mA 8V< VIN <18V, IO=40mA, ein=1VP-P, f=120Hz VIN=10V, BW=10Hz to 100kHz, IO=40mA MIN. 2.47 43 2.85 43 4.75 40 TYP. 2.6 2.0 0.2 73 35 3.0 2.0 0.2 72 40 5.0 2.0 0.4 69 70 MAX. 2.73 125 100 25 50 6 3.15 125 100 25 50 6 5.25 200 150 30 60 6 UNIT V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V
-2-
Ver.2003-07-18
NJM78L00
ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing.
PARAMETER NJM78L06A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L62A(*2) Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L07A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L08A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage (*1) : SOT-89 package only. (*2) : TO-92 package only. (*3) : SOT-89, TO-92, EMP8 SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=12V, IO=40mA VIN=8.5V to 20V, IO=40mA VIN=9V to 20V, IO=40mA VIN=12V, IO=1 to 40mA VIN=12V, IO=1 to 100mA VIN=12V, IO=0mA VIN=12V, IO=1mA 9V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=12V, BW=10Hz to 100kHz, IO=40mA VIN=12.2V, IO=40mA VIN=8.7V to 20.2V, IO=40mA VIN=9.2V to 20.2V, IO=40mA VIN=12.2V, IO=1 to 40mA VIN=12.2V, IO=1 to 100mA VIN=12.2V, IO=0mA VIN=12.2V, IO=1mA 9.2V< VIN <20.2V, IO=40mA, ein=1VP-P, f=120Hz VIN=12.2V, BW=10Hz to 100kHz, IO=40mA VIN=13V, IO=40mA VIN=9.5V to 22V, IO=40mA VIN=10V to 22V, IO=40mA VIN=13V, IO=1 to 40mA VIN=13V, IO=1 to 100mA VIN=13V, IO=0mA VIN=13V, IO=1mA 10V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=13V, BW=10Hz to 100kHz, IO=40mA VIN=14V, IO=40mA VIN=10.5V to 23V, IO=40mA VIN=11V to 23V, IO=40mA VIN=14V, IO=1 to 40mA VIN=14V, IO=1 to 100mA VIN=14V, IO=0mA VIN=14V, IO=1mA 11V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=14V, BW=10Hz to 100kHz, IO=40mA MIN. 5.7 40 5.89 40 6.65 39 7.6 39 TYP. 6.0 2.0 0.5 67 80 6.2 2.0 0.5 67 85 7.0 2.1 0.55 66 100 8.0 2.1 0.6 66 115 MAX. 6.3 200 150 40 80 6 6.51 200 150 40 85 6 7.35 210 160 45 90 6 8.4 225 175 50 100 6 UNIT V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V
Ver.2003-07-18
-3-
NJM78L00
ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing.
PARAMETER NJM78L09A(*3) Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L10A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L12A(*3) Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L15A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage (*1) : SOT-89 package only. (*2) : TO-92 package only. (*3) : SOT-89, TO-92, EMP8 SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=15V, IO=40mA VIN=11.5V to 23V, IO=40mA VIN=12V to 23V, IO=40mA VIN=15V, IO=1 to 40mA VIN=15V, IO=1 to 100mA VIN=15V, IO=0mA VIN=15V, IO=1mA 12V< VIN <21V, IO=40mA, ein=1VP-P, f=120Hz VIN=15V, BW=10Hz to 100kHz, IO=40mA VIN=16V, IO=40mA VIN=13V to 25V, IO=40mA VIN=14V to 25V, IO=40mA VIN=16V, IO=1 to 40mA VIN=16V, IO=1 to 100mA VIN=16V, IO=0mA VIN=16V, IO=1mA 13V< VIN <22V, IO=40mA, ein=1VP-P, f=120Hz VIN=16V, BW=10Hz to 100kHz, IO=40mA VIN=19V, IO=40mA VIN=14.5V to 27V, IO=40mA VIN=16V to 27V, IO=40mA VIN=19V, IO=1 to 40mA VIN=19V, IO=1 to 100mA VIN=19V, IO=0mA VIN=19V, IO=1mA 15V< VIN <25V, IO=40mA, ein=1VP-P, f=120Hz VIN=19V, BW=10Hz to 100kHz, IO=40mA VIN=23V, IO=40mA VIN=17.5V to 30V, IO=40mA VIN=20V to 30V, IO=40mA VIN=23V, IO=1 to 40mA VIN=23V, IO=1 to 100mA VIN=23V, IO=0mA VIN=23V, IO=1mA 18.5V< VIN <28.5V, IO=40mA, ein=1VP-P, f=120Hz VIN=23V, BW=10Hz to 100kHz, IO=40mA MIN. 8.55 38 9.5 37 11.4 37 14.3 34 TYP. 9.0 2.1 0.65 65 125 10.0 2.1 0.7 64 135 12.0 2.1 0.9 62 160 15.0 2.2 1.0 60 190 MAX. 9.45 250 200 50 100 6 10.5 250 200 50 100 6 12.6 250 200 50 100 6.5 15.7 300 250 75 150 6.5 UNIT V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V
-4-
Ver.2003-07-18
NJM78L00
ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing.
PARAMETER NJM78L18A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L20A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L24A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage (*1) : SOT-89 package only. (*2) : TO-92 package only. (*3) : SOT-89, TO-92, EMP8 SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=27V, IO=40mA VIN=22V to 33V, IO=40mA VIN=22V to 33V, IO=40mA VIN=27V, IO=1 to 40mA VIN=27V, IO=1 to 100mA VIN=27V, IO=0mA VIN=27V, IO=1mA 23V< VIN <33V, IO=40mA, ein=1VP-P, f=120Hz VIN=27V, BW=10Hz to 100kHz, IO=40mA VIN=29V, IO=40mA VIN=23V to 34V, IO=40mA VIN=24V to 34V, IO=40mA VIN=29V, IO=1 to 40mA VIN=29V, IO=1 to 100mA VIN=29V, IO=0mA VIN=29V, IO=1mA 24V< VIN <34V, IO=40mA, ein=1VP-P, f=120Hz VIN=29V, BW=10Hz to 100kHz, IO=40mA VIN=33V, IO=40mA VIN=27V to 38V, IO=40mA VIN=28V to 38V, IO=40mA VIN=33V, IO=1 to 40mA VIN=33V, IO=1 to 100mA VIN=33V, IO=0mA VIN=33V, IO=1mA 27.5V< VIN <37.5V, IO=40mA, ein=1VP-P, f=120Hz VIN=33V, BW=10Hz to 100kHz, IO=40mA MIN. 17.1 33 19.0 32 22.8 32 TYP. 18.0 2.2 1.1 59 230 20.0 2.3 1.2 58 250 24 2.3 1.4 57 280 MAX. 18.9 320 270 80 160 6.5 21.0 330 280 90 180 7 25.2 350 300 100 200 7 UNIT V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V V mV mV mV mV mA mV/C dB V
SOT-89 MARK
(1) (2) (3) (4) 8 : Positive Output VO Rank The end of A.D. Production Mouth Oct. ***X Nov. ***Y Dec. ***Z NJM78L02A NJM78L03A NJM78L05A NJM78L06A NJM78L62A NJM78L07A NJM78L08A NJM78L09A NJM78L10A NJM78L12A NJM78L15A NJM78L18A NJM78L20A NJM78L24A 8 8 8 8 8 8 8 8 8 8 8 8 8 8 A B C E Z F G H J K L M N P
Ver.2003-07-18
-5-
NJM78L00
TEST CIRCUIT 1. Output Voltage, Line Regulation, Load Regulation, Quiescent Current, Average Temperature Coefficient of Output Voltage, Output Noise Voltage, Peak Output/Short-Circuit Current 2. Ripple Rejection
AMBIENT TEMPERATURE VS.POWER DISSIPATION
-6-
Ver.2003-07-18
NJM78L00
TYPICAL CHARACTERISTICS NJM78L05 / L12 / L24 Output Characteristics
NJM78L05 Dropout Characteristics
NJM78L00 Series Short Circuit Output Current
NJM78L02 / L24 Quiescent Current vs. Output Current
NJM78L05 Quiescent Current vs. Input Voltage
Ver.2003-07-18
-7-
NJM78L00
TYPICAL CHARACTERISTICS NJM78L05 / L12 / L24 Thermal Shutdown Characteristics NJM78L05 / L12 / L24 Load Characteristics
NJM78L02 / L24 Ripple Rejection
NJM78L05 Output Voltage vs. Temperature
NJM78L12 Output Voltage vs. Temperature
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
-8-
Ver.2003-07-18

▲Up To Search▲

Price & Availability of NJM78L00

	To Download NJM78L00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .